single-in-line sockets solder tail single row www.mill-max.com 516-922-6000 46 series 310, 311, 315 ordering information series 310...001 standard solder tail 310-xx-1_ _-41-001000 series 311...001 long solder tail 311-xx-1_ _-41-001000 series 315...001 very low profile 315-xx-1_ _-41-001000 series 315...003 ultra low profile 315-xx-1_ _-41-003000 fig. 1 fig. 2 fig. 3 fig. 4 specify # of pins 01-64 specify # of pins 01-64 specify # of pins 01-64 specify # of pins 01-64 ? sip sockets accept .015 - .025? diameter pins and standard ic leads. ? various solder tails available: standard length, long for multi- layer boards, very low and ultra low profile. see mill-max #1001, 0134, 0501 or 0703 pins (pages 130, 131, 134) for details. ? hi-rel, 4-finger becu #12 & #30 clips rated at 3 amps. see pages 207 & 208 for details. fig. 4 fig. 3 fig. 2 fig. 1 specify plating code xx= 13 91 93 99 41 43 44 sleeve (pin) contact (clip) 10? au 200? sn/pb 200? sn/pb 200? sn/pb 200?sn 200?sn 200?sn 30? au 10? au 30? au 200? sn/pb 10? au 30? au 200?sn xx=plating code see below 2 o ( 3 % # for rohs compliance, select plating code. for the all gold option (xx=13) also change part number from 31x-xx-1xx-41-00x0 00 to 31x-13-1xx-41-00x1 00
|
